1 Gal. |
$25.50
ea |
5 Gal. |
$109.00
ea |
|
Acrylic-Silicone based pigmented sealer
Penetrates
deeply into any cementious surface
Seals
out foreign substances
Surface
must be clean and dry before application
Apply
by brush, roller or airless sprayer
Dry
to the touch in approx. 15 minutes, 1 hour foot
traffic, 72 to 96 hours vehicle
traffic
Low
temperatures (below 60ºF) or high humidity can
prolong drying times
Apply
on bare, stamped concrete, spray deck,
kool
deck, texture deck, brick pavers
or any other
concrete surface previously stained with a
solvent
based stain
See
label for further preparation and application
instructions
Skid
Guard can be added to sealer to reduce slipping
Approx.
coverage: 150 - 200 sq. ft. per gallon per coat
(Additional coverage if applied by airless sprayer)
Allow 12 hours drying time between each coat.
This is a 2 coat application.
|
