Paver Sealer

Seals, protects and brightens pavers
Solvent clear acrylic sealer
Resists ultraviolet rays
Non-yellowing
Resists grease and oil
Interlocking brick pavers require 48 to 72 hours
drying time after cleaning before sealer can be
applied
Two-coat application: Allow 12 hours between coats!
Skid Guard can be added to sealer to reduce slipping
Coverage:
Approx. 150-200 sq. ft. per gallon per coat

1 Gal.	Item #
$22.50 ea	#203151
5 Gal.
$87.00 ea	#203150

PREPARATION & ADDITIONAL INFORMATION:
SURFACE MUST BE CLEAN AND DRY BEFORE SEALER CAN BE APPLIED
SEALER SHOULD NOT BE DILUTED
APPLY BY BRUSH, ROLLER, PUMP SPRAYER OR AIRLESS SPRAYER
DRIES TO THE TOUCH IN APPROX. 1 HR
2 HRS. FOR FOOT TRAFFIC.
48 HRS. FOR VEHICLE TRAFFIC
LOW TEMPERATURES BELOW 60°F OR HIGH HUMIDITY CAN PROLONG DRYING TIME
SEE LABEL FOR FURTHER PREPARATION AND APPLICATION INSTRUCTIONS.