Florida: 954-973-4528 / Out of Area: 800-952-5980 / Fax: 954-973-4926
2000 Banks Road - Margate, FL 33063
E-mail: sales@advancedsurfaces.com
Mon - Fri 7:30 AM to 5:00 PM Sat 8:00 AM to 1:00 PM E.S.T.

Please maximize your web browser for best results!



Home Products About Us Contact Us Tools Installation Freight Clean & Seal Photos
ADDITIVES
CLEAR SEALERS
RESINS
CONCRETE STAIN
DRAINS
STAMPED CONCRETE
TOOLS
WASHERS
CLEANERS
SOLVENTS
TROWELS
CHATTAHOOCHEE
VIDEOS - INSTALLATION

Paver Sealer Natural (Water Based)

Natural - Low Luster








APPROX. DRY TIME
To Touch 1 hour
Recoat 4 hrs.
Foot Traffic 4 hrs.
Heavy Traffic/Vehicle 72 hrs.

Clear Paver Seal (Water Based)

dot Premium quality low luster sealer
dot Enhance the appearance of pavers natural, low luster finish
dot Can be applied to retaining walls
dot VOC compliant ..........BONDS JOINT SAND
dot Will apply milky white and dry clear
dot Read directions on container before applying sealer
dot Interlocking brick pavers require 48 to 72 hrs. drying time
dot Apply 2nd coat after 4 hours
dot Coverage: Approx. 75 to 250 sq. ft. per gal.

1 Gallon
$18.95ea.
#203153
5 Gallon
$89.95ea.
#203152
 




APPLICATION: Air temperature should be above 50 degrees F and below 95 degrees F. This product can be applied with a brush or roller. Rollers should be of synthetic material and nap thickness should not exceed 3/8". If airless spraying, tip orifice should not exceed .017". Backroll to remove excess sealer. This will ensure an even finish. DO NOT overapply as "blushing" may result.

CLEAN UP: Clean sprayer and tools with soap and water immediately after use. Spray water through the line of the sprayer.

MAINTENANCE: Clean light to medium soiled surfaces with a 50/50 solution of Advanced Cleaner & Degreaser to water. Use Advanced Cleaner & Degreaser at full strength for heavy soiled areas, such as oil and grease stains.