WB90 Clear Seal (Water Base)

APPROX. DRY TIME

To Touch	1 hour
Recoat	2 hrs.
Foot Traffic	24 hrs.
Heavy Traffic/Vehicle	72-96 hrs.

WB90 Clear Seal (Water Based)

Seals and protects cementious surfaces
100% clear acrylic sealer
Can be used for both interior and exterior
VOC compliant
Will apply milky white and dry clear
Read directions on container before applying sealer
Allow 2 hours to dry between coats
Apply second coat immediately after 2 hours
Coverage: Approx. 100 to 300 sq. ft. per gal.

1 Gallon	$ 23.59 ea.	#203155
5 Gallon	$134.99 ea.	#203154

Coverage Per Gal., Per Coat

Previously Coated	200-300
Pourus Concrete	100-200
Pourus Decorative Block	75-100
Concrete Block	100-150
Brick (Clay)	100-150

APPLICATION: Air temperature should be above 50 degrees F and below 95 degrees F. This product can be applied with a brush and roller. Rollers should be of synthetic material and nap thickness should not exceed 3/8". If airless spraying, tip orifice should not exceed .017". Backroll sealer to remove excess sealer. This will ensure an even finish. DO NOT over apply as "blushing" may result.

CLEAN UP: Clean sprayer and tools with soap and water immediately after use. Spray water through the line of the sprayer.

MAINTENANCE: Clean light to medium soiled surfaces with a 50/50 solution of Advanced Cleaner & Degreaser to water. Use Advanced Cleaner & Degreaser at full strength for heavy soiled areas, such as oil and grease stains.

PRODUCTS